1. DigiFlex® Performance™ Series
Drive Any Motors with Any Feedback

(1). Canopen+Encoder
(2). Canopen+Absolute
(3). Canopen+Resolver
(4). Canopen+SIN/COS+HALL
(5). RS232/485+Encoder
(6). RS232/485+Absolute
(7). RS232/485+Resolver
(8). RS232/485+SIN/COS+HALL
(9). Synqnet
(10). Engineering Notes
(11). Installation Notes

2. Analog Drives

(1). Analog Command
(2). PWM Input
(3). Sinusoidal Input
(4). Engineering Notes
(5). Installation Notes

ADVANCED Motion Controls servo drives can be separated into two main categories: DigiFlex® Performance™ digital servo drives and analog servo drives. A well designed machine that uses an analog drive compared with a well designed machine that uses a digital drive will have performance that is about the same. The major difference between the two isn't in the final performance but rather in the setup/configuration and the intelligence. Deciding whether to use a digital drive or an analog drive really depends on what you need the drive to do. If you already have an intelligent controller that can handle events and it has enough I/O then either will work for your system. If your controller has limitations then a digital drive may be able to make up for them.

 

 

 

1. Digital Servo Drives

(1). Xenus
(2). Accelnet
(3). Stepnet
(4). Accelus
(5). Junus
(6). Others

2. Analog Servo Amplifiers

(1). 400 Series
(2). 503 Series
(3). 5xx4AC
(4). 7xx5AC
(5). Others

Copley Controls Corp. is dedicated to providing OEMs with a performance edge. Advanced tuning and commutation algorithms, made possible by state-of-the-art DSP technology, maximize motor performance. From networked amplifiers for distributed control to traditional torque amplifiers, Copley has the solution for your system architecture requirements.

 

1. Stepping Drivers


(1). DM Series Fully Digital Stepping Drivers
(2). New M Series Highly Cost-effective Stepping Drivers
(3). Other Documents

2. Servo Products

(1). ACS & DCS Servo Drives
(2). ACM & DCM5xxxx Servo Motors
(3). Other Documents


 



Leadshine Technology Co.,Ltd., founded in 1997, specializes in development, manufacturing and sales of high-quality low-cost motion control products. It's the largest manufacturer of stepping drivers in China, and has its own servo products, motion controllers, and etc.

Leadshine’s manufacturing facilities in China are superiorly equipped, professionally staffed, and ISO-9001 certified. As a result, Leadshine has the capability to supply high-quality stepping and servo products at extremely competitive prices. Leadshine’s products have been successfully applied and proven in thousands of applications such as electronics equipment, analytical and medical instruments, assembly, semiconductor manufacturing, packaging, engraving, texitile equipment, robotics and pick-and-place devices. Leadshine’s standard "off-the-shelf" products most often can provide the solution to your stepping and servo motion control requirements. However, if your application is unusual and/or demanding Leadshine will engineer a design to optimize your product’s performance. Many times this results in increasing customer’s productivity and product reliability while reducing costs

 

1. AC Servo Drives

(1). MicroFlex™e100
(2). MicroFlex
(3). Flex DriveII
(4). Flex +DriveII
(5). MintDriveII
(6). EuroFlex™
(7). MotiFlex ™ e100
(8). Other Documents

2. DC Servo Drives

(1). TSD Series
(2). UM Series
(3). LD Series
(4). Product Manuals
(5). Product Software
(6). Other Documents

 

 

BALDOR has shipped thousands and thousands of AC and DC servo motors, drives, and controls to many diverse applications throughout the world. It all began in 1952 when Baldor shipped its first reliable adjustable speed control, and in 1983 Baldor began shipping easy to use servo controls and that tradition continues today.

Baldor's philosophy is to make control set up very fast, and easy, and quick to implement. This is accomplished by either a simple keypad, or through set-up wizards and your PC.

Baldor products help increase productivity, improve quality, work hard ?and provide solutions for your application needs.

 

1. Intelligent Digital Servo Drives Controllers

(1). Product Introduction
(2). MKT-CATPRD
(3). MKT-CATExtrIQ
(4). MKT-MAESTRO
(5). MKT-WHISTLE
(6). Elmo Next Generation Intelligent Servo Drives

 

 

 

 

Elmo Motion Control's SimplIQ product family is a set of sophisticated, network-based motion control products for brush, brushless and linear motors. SimplIQ combines high power density with a rich feature set and has been integrated in a wide range of Motion Control applications. Based on Elmo Motion Control's innovative SimplIQ core motion control technology, they support single and multi-axis control applications as well as a wide range of motor feedback options, programming capabilities and communication protocols.

 

1. High Performance Servo Drives

(1). Product Introduction
(2). GoldLine XT with ServoStar CD 600 TB
(3). MM smart
(4). Pacific P3400
(5). PACIFIC SCIENTIFIC Servo Drives
(6). Servostar600 with GoldLine XT TB
(7). Servostar CD Series2
(8). Servostar CD with Kollmorgen Motors
(9). ServoStar S300 S600
(10). SERVOSTARCD Series5










Danaher Corporation combined over 30 industry-leading brands such as Kollmorgen, Thomson, Dover, Pacific Scientific, Portescap, Neff, Seidel and Bautz to establish a customer-focused motion control manufacturing company called Danaher Motion.We offer this powerful set of integrated motion control technologies under the Danaher Motion and Thomson brand names. It's a $1B+ global motion control leader, unique in its ability to marshal decades of application experience and technical innovation to help you build better machines, faster.

Danaher Motion has a complete set of drives which offer advanced control technology along with compact packaging and simplified commissioning. Choose from a broad selection of AC servo, DC servo, adjustable speed, stepper, and OEM/custom drive products, all with models available covering a wide range of input voltage and output power level.

Danaher Motion's brushless servomotors are designed to operate over a broad range of speeds and have the advantage of reduced maintenance since there are no brushes or commutators. DC brushless motors offer superior performance with our highest torque/inertia ratio and high speed capability of up to 8,000 rpm for?standard designs (up to 70,000 rpm for special designs). Our linear brushless motors can exceed 10 m/s.

 

1. AC Servo Motors and Drives

(1). Slection Guide
(2). MINAS A4-Series
(3). MINAS A4F-Series
(4). MINAS A4P Series
(5). MINAS E Series

 



 

Panasonic is a famous motion control product manufacturer. The A4 series servo sports ultra-fast frequency times and new vibration control features while our ultra-compact E series servo/driver has slimmed in size by 47%! VF-CE inverters offer a new concept for preventing electrical interference.

 

1. Rotary Servo Motors

(1). DIrect Drive Series
(2). Mini S Series

2. Linear Servo Motors

(1). Product Introduction
(2). Slection Table
(3). SGLGW Series
(4). SGLFW Series
(5). SGLTW Series
(6). Sigma Trac Series
(7). Product Manuals
(8). Other Documents

 

 

 

 

 

Yaskawa was the first company to mass produce servomotors employing a segmented stator design. This process uses individually wound stator segments that are grouped together, press fit into the motor body, and impregnated with resin. The result is improved heat transfer, dramatic reduction in motor size and cost, and the best quality and reliability available. Yaskawa has leveraged this technology to become the largest servomotor manufacturer in the world and produced the 5,000,000th AC servomotor in 2006.

The Sigma family of servomotors has taken the next technological step using high-resolution serial encoder feedback. Position information is transmitted to the amplifier allowing full error checking which eliminates position error caused by electrical noise and prevents runaway conditions. This all-digital feedback design enables the amplifier to automatically recognize the motor and optimize settings.

All Yaskawa linear servomotors feature plug-and-play connection with the Sigma II and LEGEND amplifiers through use of automatic motor recognition and serial encoder technology. Yaskawa’s linear servomotors are supplied as components or an integrated slide. The components include a coil that directly drives the load and modular magnet tracks that allow almost unlimited machine length. The Sigma Trac slide includes direct drive components, carriage, bearings, base, and linear encoder all integrated into a plug-and-play package.

 

1. Rotary Servo Products

(1). SANMOTION R Series
(2). SANMOTION Q Series
(3). SANMOTION T Series
(4). SANMOTION R400V Series
(5). Medium Capacity Servo

 

 

 

 

 

 

Sanyo Denki has been in business since 1927 and has annual sales of over $600M. Sanyo Denki’s extensive product offering includes a leading family of motion control and ac servo system products, along with the world's largest selection of stepping motors and drives.

SANMOTION is the brand name for SANYO DENKI motion control systems. SANYO DENKI is worldwide provider of stepping and servo systems. Its products are know for their high quality reliability and state of the art design. Its systems are used in a variety of industries which include the medical, factory automation, semiconductor and defense/aerospace industries.

Products | Applications | Support | Contact Us | About Us | Home | 中文(Chinese) | Google Search
Motion Controllers
| Servo Drives | Servo Motors | Stepping Drives | Stepping Motors | Integrated Stepping | Power Supplies | Measurement Devices | Mechanical Component
 

© Copyright 2008 SIE Motion Control Technology Co., Ltd. All rights reserved.